Categories

System hiccups and false alarms can be frustrating, and more importantly, may prevent your home’s security from working the way it should. Luckily, most problems, from dead batteries to false alarms, are easy to remedy. Take a look at our tips for troubleshooting your home alarm system in Memphis. We’ll help you keep your family members protected and your system operating smoothly.

Test Your Home Security System In Memphis

One of the most sensible ways to troubleshoot your property’s defense is to test it yourself! Modern systems have a test mode so you don’t accidentally trigger an emergency call. After moving to test mode, follow these steps:

• Turn on your system as you typically would when you head out.
• Open a door or window protected by a contact sensor, or test other sensors. Shut the door or window once you’re done so it doesn’t trigger the alarm when you leave test mode.
• Let the alarm sound for 60 seconds to ensure communications with the security company and to create an entry in the alarm activity log.
• Proceed to test sensors as needed
• Review the system activity log to verify that everything’s working.

Rest assured, monitoring agents can see that your system is undergoing a test. Just be sure to turn test mode off when done. It’s smart to test monthly or anytime you adjust your home’s internet or phone service.

Inspect The Positioning And Condition Of Motion Sensors

Although an essential aspect of your alarm system, motion sensors are notorious for false alarms. You can help prevent them with a few basic troubleshooting steps.

• Perform a physical check. Are there things that could shift within range of the sensor, like drapery taken by a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and debris can lead to issues. Make sure the device is clean.
• Does the motion detector offer pet immunity you can activate? Some sensors can be configured to ignore pets up to 100 pounds.
• When was the battery replaced? A low battery may impact performance or lead to false alarms.
• Is the sensor aimed toward a source of heat? Too much heat from direct sun or a fireplace can set off an alarm.

Keep Batteries On Hand And Pay Attention To Low Battery Warnings

One of the great aspects of the latest home security systems is that they’ll tell you when batteries are running low. If your system has a control panel or smartphone app, you’ll typically see notifications there. Depending on the alarm, you could notice an occasional beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless components have batteries that will have to be replaced every so often. It’s wise to keep batteries around and establish a replacement schedule. Top systems also include a rechargeable backup battery for the central control panel. This backup keeps your system running if you lose power and should recharge itself once power is restored. If it doesn’t recharge, you will need to replace it.

Troubleshooting Is Simple With ADT Home Security In Memphis 

As the leading name in home security, ADT creates systems that provide superior functionality and protection. Accessing test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always get notifications when a battery is running low. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfectly suited to your Memphis home and family. Place a call to (901) 250-6841 or fill out our form today!